Alcatel-Lucent 7450 Configuration Manual page 566

Show Commands
Output Show Filter Associations — The following table describes the fields that display when the
associations keyword is specified.
Page 566
Label
Filter Id
Scope
Entries
Applied
Def. Action
Service Id
SAP
(Ingress)
(Egress)
Type
Entry
Log Id
Src. IP
Dest. IP
Protocol
ICMP Type
Fragment
The IP filter policy ID.
The filter policy is of type Template.
Template —
The filter policy is of type Exclusive.
Exclusive —
The number of entries configured in this filter ID.
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The default action for the filter ID for packets that do not
Forward —
match the filter entries is to forward.
The default action for the filter ID for packets that do not
Drop —
match the filter entries is to drop.
The service ID on which the filter policy ID is applied.
The Service Access Point on which the filter policy ID is applied.
The filter policy ID is applied as an ingress filter policy on the inter-
face.
The filter policy ID is applied as an egress filter policy on the interface.
The type of service of the service ID.
The filter ID filter entry ID. If the filter entry ID indicates the entry is
, the filter entry is incomplete as no action was specified.
Inactive
The filter log ID.
The source IP address and mask match criterion.
no criterion specified for the filter entry.
The destination IP address and mask match criterion.
cates no criterion specified for the filter entry.
The protocol ID for the match criteria.
col specified.
The ICMP type match criterion.
specified.
Configures a match on all non-fragmented IP packets.
False —
Configures a match on all fragmented IP packets.
True —
7450 ESS Router Configuration Guide
Description
0.0.0.0/0
indicates no proto-
Undefined
indicates no ICMP type
Undefined
indicates
indi-
0.0.0.0/0