Alcatel-Lucent 7450 Configuration Manual page 592

Show Commands
---------------------------------------------------------------------------
===============================================================================
ipv6
Syntax ipv6 <filter-id>
Context tools>dump>filter>resources
Description This command displays information about the specified IPv6 filter including resource utilization on
CPM and IOM, the IOMs on which the filter is used, and the entries using the most resources.
Parameters filter-id — specifies filter resource utilization.
Sample Output
*A:Dut-C>tools>dump>filter>resources># ipv6 "fSpec-0"
===============================================================================
Resource utilization details for Ipv6 filter fSpec-0
===============================================================================
CPM entries used
CPM subentries used
TCAM entries used (per FlexPath)
Associated with IOMs
---------------------------------------------------------------------------
Largest 5 entries
---------------------------------------------------------------------------
Entry ID
---------------------------------------------------------------------------
No Matching Entries
---------------------------------------------------------------------------
===============================================================================
mac
Syntax mac <filter-id>
Context tools>dump>filter>resources
Description This command displays information about the specified MAC filter including resource utilization on
CPM and IOM, the IOMs on which the filter is used, and the entries using the most resources.
Parameters filter-id — specifies filter resource utilization.
Page 592
Values 1 — 65535
Values
1 — 65535
: 0
: 0
: 0
: 2
Active
7450 ESS Router Configuration Guide
TCAM entries
(per FlexPath)