Mac Filter Entry Commands - Alcatel-Lucent 7450 Configuration Manual

MAC Filter Entry Commands

action
Syntax action drop
action forward [sap sap-id |sdp sdp-id]
no action
Context config>filter>mac-filter>entry
Description This command configures the action for a MAC filter entry. Multiple action statements entered will
overwrite previous actions parameters when defined. To remove a parameter, use the no form of the
action command with the specified parameter.
The no form of the command removes the specified action statement. The filter entry is considered
incomplete and hence rendered inactive without the action keyword.
Default none
Parameters
drop — Specifies packets matching the entry criteria will be dropped.
forward — Specifies packets matching the entry criteria will be forwarded. Only Ethernet SAPs are
sap sap-id — Specifies the SAP ID. Refer to
Port Type Encap-Type
Ethernet Null
Ethernet Dot1q
Ethernet QinQ
7450 ESS Router Configuration Guide
supported (including q-in-q, BCP, and bridged Ethernet in Frame Relay).
If neither drop nor forward is specified, the filter action is no-op and the filter entry is inactive.
SAP CLI command syntax and parameter descriptions.
Allowed Values
0
0 — 4094
qtag1: 0 — 4094
qtag2: 0 — 4094
Common CLI Command Descriptions on page 523
Comments
The SAP is identified by the port.
The SAP is identified by the 802.1Q tag on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
Filter Policies
for
Page 539