Alcatel-Lucent 7450 Configuration Manual page 152

Router L2TP Commands
Enter the no form of the command to maintain a persistent tunnel.
The no form of the command removes the idle timeout from the configuration.
Default no idle-timeout
Parameters idle-timeout — Specifies the idle timeout value, in seconds until the group is removed.
lns-group
Syntax lns-group lns-group-id
no lns-group
Context config>router>l2tp>group
Description This command configures the ISA LNS group.
Parameters
lns-group-id — Specifies the LNS group ID.
load-balance-method
Syntax load-balance-method {per-session|per-tunnel}
no load-balance-method
Context config>router>l2tp>group
config>router>l2tp>group>tunnel
Description This command describes how new sessions are assigned to an L2TP ISA MDA.
Parameters per-session — Specifies that the lowest granularity for load-balancing is a session; each session can
per-tunnel — Specifies that the lowest granularity for load-balancing is a tunnel; all sessions
local-address
Syntax local-address ip-address
Page 152
Default no idle-timeout
Values
0 — 3600
Values 1 — 4
be assigned to a different
ISA MDA.
associated with the same tunnel are assigned to the same ISA MDA; this may be useful or
required in certain cases, for example:
• MLPPP with multiple links per bundle;
• HPol intermediate destination arbiters where the intermediate destination is an L2TP tunnel.
7450 ESS Router Configuration Guide