Deleting A Filter Policy - Alcatel-Lucent 7450 Configuration Manual

Hide thumbs Also See for 7450:

Table of Contents

Deleting a Filter Policy

Before you can delete a filter, you must remove the filter association from all the applied ingress

and egress SAPs and network interfaces by executing no filter command in all context where the

filter is used.

The following illustrates an example of removing a filter (filter ID 11) from an ingress ePipe SAP:

After you have removed the filter from the SAPs network interfaces, you can delete the filter as

shown in the following example.

config>service# epipe 5

config>service>epipe# sap 1/1/2:3

config>service>epipe>sap# ingress

config>service>epipe>sap>ingress# no filter

config>filter# no ip-filter 11

7450 ESS Router Configuration Guide