Alcatel-Lucent 7450 Configuration Manual page 523

match
Syntax match [next-header next-header]
no match
Context config>filter>ipv6-filter>entry
Description
This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
IA match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters next-header — Specifies the IPv6 next header to match. Note that this parameter is analogous to the
dscp
Syntax dscp dscp-name
no dscp
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description This command configures a DiffServ Code Point (DSCP) name to be used as an IP filter match
criterion.
The no form of the command removes the DSCP match criterion.
Default
no dscp
7450 ESS Router Configuration Guide
Protocol Protocol ID
encap 98
pnni 102
pim 103
vrrp 112
l2tp 115
stp 118
ptp 123
isis 124
crtp 126
crudp 127
protocol parameter used in IP-Filter match criteria.
Description
Encapsulation Header
PNNI over IP
Protocol Independent Multicast
Virtual Router Redundancy Protocol
Layer Two Tunneling Protocol
Spanning Tree Protocol
Performance Transparency Protocol
ISIS over IPv4
Combat Radio Transport Protocol
Combat Radio User Datagram
Filter Policies
Page 523