Filter Management Tasks; Renumbering Filter Policy Entries - Alcatel-Lucent 7450 Configuration Manual

Filter Management Tasks

Filter Management Tasks
This section discusses the following filter policy management tasks:
•
•
•
•
•
•

Renumbering Filter Policy Entries

The system exits the matching process when the first match is found and then executes the actions
in accordance with the specified action. Because the ordering of entries is important, the
numbering sequence may need to be rearranged. Entries should be numbered from the most
explicit to the least explicit.
The following example illustrates renumbering of filter entries.
Example
The following displays the original filter entry order on the left side and the reordered filter entries
on the right side:
Page 482
Renumbering Filter Policy Entries on page 482
Modifying a Filter Policy on page 484
Deleting a Filter Policy on page 486
Modifying a Redirect Policy on page 487
Deleting a Redirect Policy on page 488
Copying Filter Policies on page 489
:
config>filter>ip-filter# renum 10 15
config>filter>ip-filter# renum 20 10
config>filter>ip-filter# renum 40 1
7450 ESS Router Configuration Guide