Alcatel-Lucent 7450 Configuration Manual page 233

Auto Filter
Snoop
Interfaces
Sample Output
A:ALA-1# show router dhcp summary
===============================================================================
DHCP6 Summary (Router: Base)
===============================================================================
Interface Name
SapId
-------------------------------------------------------------------------------
interfaceServiceDefault
sap:1/2/12:1
interfaceService
sap:1/2/1
interfaceServiceNonDefault
sap:1/2/12:2
ip-61.4.113.4
sap:1/1/1:1
=============================================================================
A:ALA-1#
ecmp
Syntax ecmp
Context show>router
Description This command displays the ECMP settings for the router.
Output ECMP Settings Output — The following table describes the output fields for the router ECMP
settings.
Instance
Router Name
ECMP
Configured-ECMP-Routes
7450 ESS Router Configuration Guide
Indicates whether IP Auto Filter is enabled on the interface.
Indicates whether Auto ARP table population is enabled on the interface.
Indicates the total number of router interfaces on the router.
Label
The router instance number.
The name of the router instance.
False — ECMP is disabled for the instance.
True — ECMP is enabled for the instance.
The number of ECMP routes configured for path sharing.
Nbr Used/Max Relay
Resol. Used/Max Server
No 0/0
0/8000
No 0/0
0/8000
No 0/0
0/8000
Yes 575/8000
580/8000
Description
IP Router Configuration
Admin Oper Relay
Admin Oper Server
Up NoServerCo*
Up Up
Down Down
Down Down
Up NoServerCo*
Down Down
Up Up
Up Up
Page 233