Alcatel-Lucent 7450 Configuration Manual page 567

7450 ESS Router Configuration Guide
Label
Sampling
IP-Option
TCP-syn
Match action
Ing. Matches
Src. Port
Dest. Port
Dscp
ICMP Code
Option-present
Int. Sampling
Description (Continued)
Fragments are not a matching criteria. All fragments and non-
Off —
fragments implicitly match.
Specifies that traffic sampling is disabled.
Off —
Specifies that traffic matching the associated IP filter entry is
On —
sampled.
Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
Configures a match on packets with the SYN flag set to
False —
false.
Configured a match on packets with the SYN flag set to true.
True —
The state of the TCP SYN flag is not considered as part of the
Off —
match criteria.
The filter does not have an explicit forward or drop
Default —
match action specified. If the filter entry ID indicates the entry is
, the filter entry is incomplete (no action was specified).
Inactive
Drop packets matching the filter entry.
Drop —
The explicit action to perform is forwarding of the
Forward —
packet. If the action is Forward, then if configured the nexthop infor-
mation should be displayed, including Nexthop: <IP address>, Indi-
rect: <IP address> or Interface: <IP interface name>.
The number of ingress filter matches/hits for the filter entry.
The source TCP, UDP, or SCTP port number, port range, or port match
list.
The destination TCP, UDP, or SCTP port number, port range, or port
match list.
The DiffServ Code Point (DSCP) name.
The ICMP code field in the ICMP header of an IP packet.
Specifies not to search for packets that contain the option field
Off —
or have an option field of zero.
Matches packets that contain the option field or have an option
On —
field of zero be used as IP filter match criteria.
Interface traffic sampling is disabled.
Off —
Interface traffic sampling is enabled.
On —
Filter Policies
Page 567