Alcatel-Lucent 7450 Configuration Manual page 266

Show Commands
Output Neighbor Output — The following table describes neighbor output fields.
IPv6 Address
Interface
MAC Address
State
Exp
Type
Interface
Rtr
Mtu
Sample Output
B:CORE2# show router neighbor
===============================================================================
Neighbor Table (Router: Base)
===============================================================================
IPv6 Address
-------------------------------------------------------------------------------
FE80::203:FAFF:FE78:5C88
FE80::203:FAFF:FE81:6888
-------------------------------------------------------------------------------
No. of Neighbor Entries: 2
===============================================================================
B:CORE2#
network-domains
Syntax network-domains [detail] [network-domain-name]
Context show>router
Description
This command displays network-domains information.
Parameters detail — Displays detailed network-domains information.
network-domain-name — Displays information for a specific network domain.
Page 266
Label
Displays the IPv6 address.
Displays the name of the IPv6 interface name.
Specifies the link-layer address.
Displays the current administrative state.
Displays the number of seconds until the entry expires.
Displays the type of IPv6 interface.
Displays the interface name.
Specifies whether a neighbor is a router.
Displays the MTU size.
MAC Address
00:16:4d:50:17:a3
00:03:fa:1a:79:22
Description
Interface
State Expiry
net1_1_2
STALE 03h52m08s
net1_2_3
STALE 03h29m28s
7450 ESS Router Configuration Guide
Type RTR
Dynamic Yes
Dynamic Yes