Alcatel-Lucent 7450 Configuration Manual page 123

shutdown
Syntax shutdown
no shutdown
Context config>router>origin-validation>rpki-session
Description
This command administratively disables an RPKI-Router session. The no form of the command
enables the RPKI-Router session.
Default no shutdown
stale-time
Syntax stale-time seconds
no stale-time
Context config>router>origin-validation>rpki-session
Description This command configures the maximum length of time that prefix origin validation records learned
from the cache server remain useable after the RPKI-Router session goes down. The default stale-
time is 3600 seconds (1 hour). When the timer expires all remaining stale entries associated with the
session are deleted.
Default
no stale-time
Parameters seconds — Specifies a time in seconds.
static-entry
Syntax static-entry ip-prefix/ip-prefix-length upto prefix-length2 origin-as as-number [valid |
invalid]
no static-entry ip-prefix/ip-prefix-length upto prefix-length2 origin-as as-number
Context config>router>origin-validation
Description
This command configures a static VRP entry indicating that a particular origin AS is either valid or
invalid for a particular IP prefix range. Static VRP entries are stored along with dynamic VRP entries
(learned from local cache servers using the RPKI-Router protocol) in the origin validation database of
the router. This database is used for determining the origin-validation state of IPv4 and/or IPv6 BGP
routes received over sessions with the enable-origin-validation command configured.
Note that static entries can only be configured under the config>router>origin-validation context of
the base router.
Default
no static entries
Parameters ip-prefix/ip-prefix-length — Specifies an IPv4 or IPv6 address with a minimum prefix length value.
7450 ESS Router Configuration Guide
Values 60-3600
Values 60-3600
IP Router Configuration
Page 123