Alcatel-Lucent 7450 Configuration Manual page 119

static-label-range
Syntax static-label-range static-range
no static-label-range
Context config>router>mpls-labels
Description
This command configures the range of MPLS static label values shared among static LSP, MPLS-TP
LSP, and static service VC label. Once this range is configured, it is reserved and cannot be used by
other protocols such as RSVP, LDP, BGP, or Segment Routing to assign a label dynamically.
Parameters static-range — Size of the static label range in number of labels. The minimum label value in the
sr-labels
Syntax sr-labels start start-value end end-value
no sr-labels
Context config>router>mpls-labels
Description
This command configures the range of the Segment Routing Global Block (SRGB). It is a label block
which is used for assigning labels to segment routing prefix SIDs originated by this router. This range
is carved from the system dynamic label range and is not instantiated by default.
This is a reserved label and once configured it cannot be used by other protocols such as RSVP, LDP,
and BGP to assign a label dynamically.
Parameters start start-value — start label value in the SRGB
end end-value — end label value in the SRGB
multicast-info
Syntax multicast-info-policy policy-name
no multicast-info-policy
Context configure>router
Description This command configures multicast information policy.
7450 ESS Router Configuration Guide
range is 32. The maximum label value is thus computed as {32+ static-range-1}.
Values 0 — 131040 for chassis mode C
Values 0 — 262112 for chassis mode D
Default 18400
Values 18432 — 524287
Default none
Values 18432 — 524287
Default none
IP Router Configuration
Page 119