Deleting A Redirect Policy - Alcatel-Lucent 7450 Configuration Manual

Deleting a Redirect Policy

Deleting a Redirect Policy
Before you can delete a redirect policy from the filter configuration, you must remove the policy
association from the IP filter.
The following example shows the command usage to replace the configured redirect policy
(redirect1) with a different redirect policy (redirect2) and then removing the redirect1 policy
from the filter configuration.
Example
redirect2
A:ALA-7>config>filter>ip-filter# info
----------------------------------------------
...
----------------------------------------------
A:ALA-7>config>filter>ip-filter#
Page 488
:
config>filter>ip-filter 11
config>filter>ip-filter# entry 1
config>filter>ip-filter>entry# action forward redirect-policy
config>filter>ip-filter>entry# exit
config>filter>ip-filter# exit
config>filter# no redirect-policy redirect1
description "This is new"
scope exclusive
entry 1 create
filter-sample
interface-disable-sample
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.106/24
exit
action forward redirect-policy redirect2
exit
entry 2 create
description "new entry"
7450 ESS Router Configuration Guide