Alcatel-Lucent 7450 Configuration Manual page 538

Match List Configuration Commands
Description
This command adds an IPv4 address prefix to an existing IPv4 address prefix match list.
The no form of this command deletes the specified prefix from the list.
Operational notes:
To add set of unique prefixes, execute the command with all unique prefixes. The prefixes are
allowed to overlap IPv4 address space.
An IPv4 prefix addition will be blocked, if resource exhaustion is detected anywhere in the system
because of Filter Policies that use this IPv4 address prefix list.
Default none
Parameters ip-prefix — A valid IPv4 address prefix in dotted decimal notation.
prefix-length — Length of the entered IP prefix.
Page 538
Values 0.0.0.0 to 255.255.255.255 (host bit must be 0)
Values
0 — 32
7450 ESS Router Configuration Guide