Creating Interface Parameters - Alcatel-Lucent 7450 Configuration Manual

Creating Interface Parameters

If you have multiple subnets configured on an Ethernet interface, you can configure VRRP on
each subnet.
The following displays an IP interface configuration example:
A:SR1>config>router# info
#------------------------------------------
echo "IP Configuration "
#------------------------------------------
#------------------------------------------
A:SR1>config>router#
7450 ESS Router Configuration Guide
interface "system"
address 10.10.0.1/32
exit
interface "testA"
address 123.123.123.123/24
exit
interface "testB"
address 10.10.14.1/24
secondary 10.10.16.1/24
secondary 10.10.17.1/24
secondary 10.10.18.1/24
exit
router-id 10.10.0.1
Configuring System Management with CLI
Page 369