Alcatel-Lucent 7450 Configuration Manual page 651
Hide thumbs
Also See for 7450:
- Quality of service manual (912 pages) ,
- Manual (816 pages) ,
- Configuration manual (778 pages)
Table of Contents
Advertisement
Table 20: Cflowd Status Output (Continued)
Active Timeout
Inactive Timeout
Template Retrans-
mit
Cache Size
Overflow
Sample Rate
Active Flows
Total Pkts Rcvd
Total Pkts Dropped
Aggregation Info:
Type
Status
Sent
Open
Error
Overflow events
Dropped Flows
Sample Output
sr1# show cflowd status
===============================================================================
Cflowd Status
===============================================================================
Cflowd Admin Status : Enabled
7450 ESS Router Configuration GuidePage 651
Label
The maximum amount of time, in minutes, before an active flow will
be exported. If an individual flow is active for this amount of time, the
flow is exported and a new flow is created.
Inactive timeout in seconds.
The time in seconds before template definitions are sent.
The maximum number of active flows to be maintained in the flow
cache table.
The percentage number of flows to be flushed when the flow cache
size has been exceeded.
The rate at which traffic is sampled and forwarded for Cflowd analysis.
one (1) —
1000 (default) —
The current number of active flows being collected.
The rate at which traffic is sampled and forwarded for Cflowd analysis.
The total number of packets dropped.
The type of data to be aggregated and to the collector.
enabled —
disabled —
The number of packets with flow date sent to the associated collector.
This counter shows the number of partially filled packets which have
some flow data but are not yet filled or have been timed out (60 sec-
onds maximum).
This counter increments when there was an error during exporting of
the collector packet. The most common reason will be a UDP unreach-
able destination for the configured collector.
The number of times the active cache overflowed.
Equal to "total flows trashed" in cflowdStatsTotal.
Description (Continued)
All packets are analyzed.
Every 1000th packet is analyzed.
Specifies that the aggregation type is enabled.
Specifies that the aggregation type is disabled.
Cflowd
Advertisement
Table of Contents
