Alcatel-Lucent 7450 Configuration Manual page 519

IP (v4/v6) Filter Entry Commands
action
Syntax For IPv4:
action [drop]
action forward [lsp lsp-name]
action forward
action drop packet-length {{lt | eq | gt} packet-length-value | range packet-length-value
packet-length-value}
action forward next-hop {ip-address | indirect ip-address | interface ip-int-name}
action forward redirect-policy policy-name
action forward {sap sap-id | sdp sdp-id:vc-id}
action forward lsp lsp-name
action gtp-local-breakout
action nat [nat-policy nat-policy-name]
action reassemble
action http-redirect rdr-url-string [allow-radius-override]
no action
For IPv6:
action [drop]
action drop packet-length {{lt | eq | gt} packet-length-value | range packet-length-value
packet-length-value}
action forward
action forward next-hop {ipv6-address | indirect ipv6-address}
action forward lsp lsp-name
action forward redirect-policy policy-name
action forward router {router-instance | service-name service-name}
action forward {sap sap-id | sdp sdp-id:vc-id}
action http-redirect rdr-url-string [allow-radius-override]
action nat nat-type nat-type [nat-policy nat-policy-name]
no action
Context config>filter>ip-filter>entry
config>filter>ipv6-filter>entry
Description This command specifies the action to take for packets that match this filter entry. The action
command must be entered with a keyword specified in order for the entry to be active.
The no form of the command removes the specified action statement.
Default
no action
Parameters drop — Specifies packets matching the entry criteria will be dropped.
forward — Specifies packets matching the entry criteria will be forwarded.
next-hop ip-address — The IPv4 address of the direct next-hop to which to forward matching
7450 ESS Router Configuration Guide
packets in dotted decimal notation.
Filter Policies
Page 519