Alcatel-Lucent 7450 Configuration Manual page 402

Priority Policy Event Commands
Default
0 delta — The set event will subtract 0 from the base priority (no effect).
Parameters priority-level — The priority level adjustment value expressed as a decimal integer.
delta | explicit — Configures what effect the priority-level will have on the base priority value.
mc-ipsec-non-forwarding
Syntax [no] mc-ipsec-non-forwarding tunnel-grp-id
Context config>vrrp>policy>priority-event
Description Thic command configures an instance of a multi-chassis IPsec tunnel-group Priority Event used to
override the base priority value of a VRRP virtual router instance depending on the operational state
of the event.
Parameters
tunnel-grp-id — Identifies the multi-chassis IPSec tunnel group whose non-forwarding state is
Page 402
Values
0 — 254
When delta is specified, the priority-level value is subtracted from the associated virtual router
instance's base priority when the event is set and no explicit events are set. The sum of the
priority event priority-level values on all set delta priority events are subtracted from the virtual
router base priority to derive the virtual router instance in-use priority value. If the delta priority
event is cleared, the priority-level is no longer used in the in-use priority calculation.
When explicit is specified, the priority-level value is used to override the base priority of the
virtual router instance if the priority event is set and no other explicit priority event is set with a
lower priority-level. The set explicit priority value with the lowest priority-level determines the
actual in-use protocol value for all virtual router instances associated with the policy.
Default delta
Values
delta, explicit
monitored by this priority control event.
7450 ESS Router Configuration Guide