Filter Management Tasks; Renumbering Filter Policy Entries - Alcatel-Lucent 7750 SR OS Configuration Manual

Filter Management Tasks

Filter Management Tasks
This section discusses the following filter policy management tasks:
•
•
•
•
•
•
•
•

Renumbering Filter Policy Entries

The 7750 SR OS exits the matching process when the first match is found and then executes the
actions in accordance with the specified action. Because the ordering of entries is important, the
numbering sequence can be rearranged. Entries should be numbered from the most explicit to the
least explicit.
Use the following CLI syntax to renumber existing MAC or IP filter entries to re-sequence filter
entries:
CLI Syntax: config>filter
Example
Page 336
Renumbering Filter Policy Entries on page 336
Modifying an IP Filter Policy on page 338
Modifying a MAC Filter Policy on page 341
Deleting a Filter Policy on page 342
Modifying an IP Filter Policy on page 338
Modifying an IPv6 Filter Policy on page 340
Modifying a MAC Filter Policy on page 341
Copying Filter Policies on page 349
ip-filter filter-id
renum old-entry-number new-entry-number
mac-filter filter-id
renum old-entry-number new-entry-number
:
config>filter>ip-filter# renum 10 15
config>filter>ip-filter# renum 20 10
config>filter>ip-filter# renum 40 1
7750 SR OS Router Configuration Guide