Table of Contents
Advertisement
Creating Interface Parameters
If you have multiple subnets configured on an Ethernet interface, you can configure VRRP on
each subnet.
The following displays an IP interface configuration example:
A:SR1>config>router# info
#------------------------------------------
echo "IP Configuration "
#------------------------------------------
#------------------------------------------
A:SR1>config>router#
Page 332
interface "system"
address 10.10.0.1/32
exit
interface "testA"
address 123.123.123.123/24
exit
interface "testB"
address 10.10.14.1/24
secondary 10.10.16.1/24
secondary 10.10.17.1/24
secondary 10.10.18.1/24
exit
router-id 10.10.0.1
7750 SR OS Router Configuration Guide
Advertisement
Table of Contents
