Creating Interface Parameters - Alcatel-Lucent 7450 ESS Series Configuration Manual

Creating Interface Parameters

If you have multiple subnets configured on an Ethernet interface, you can configure VRRP on
each subnet.
The following displays an IP interface configuration example:
A:SR1>config>router# info
#------------------------------------------
echo "IP Configuration "
#------------------------------------------
#------------------------------------------
A:SR1>config>router#
7450 ESS OS Router Configuration Guide
interface "system"
address 10.10.0.1/32
exit
interface "testA"
address 123.123.123.123/24
exit
interface "testB"
address 10.10.14.1/24
secondary 10.10.16.1/24
secondary 10.10.17.1/24
secondary 10.10.18.1/24
exit
router-id 10.10.0.1
VRRP
Page 277