Fs Control Board (Fscb) - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.0 Jan. 2010 3. OTHER MAINTENANCE ITEM
14. Remove the front shaft and remove
[1]
the exit tray unit [1].
A0U7F2C511DA
15. Reinstall the above parts following the removal steps in reverse.
3.3.9

FS control board (FSCB)

1. Remove the rear cover.
See P.8
2. Remove all connectors from the FS control board.
3. Remove the screw [1] and two board supports [2], and remove the FS control board [3].
[2] [2]
[1]
[3]
A0U7F2C013DA
4. Reinstall the above parts following the removal steps in reverse.
15