Field Service Ver. 2.0 Jan. 2010
3.3.12
Conveyance motor/1 (M5)
1. Remove the rear cover.
See P.8
2. Remove the conveyance roller unit.
See P.10
3. Remove the FS control board.
See P.15
4. Remove the harness guide.
See P.28
[2]
[2]
[3]
9. Reinstall the above parts following the removal steps in reverse.
[1]
A0U7F2C033DA
[1]
A0U7F2C019DA
[2]
[1]
A0U7F2C020DA
3. OTHER MAINTENANCE ITEM
5. Remove three screws [1], and
remove the rear rail [2].
6. Remove two screws [1], and remove
the sensor assy [2].
7. Disconnect the connector [1].
8. Remove three screws [2], and
remove the conveyance motor/1 [3].
19