3. OTHER MAINTENANCE ITEM
A. Adjustment after installation
1. Remove the rear cover.
See P.8
[2]
[1]
[1]
[3]
26
[1]
A0U7F2C036DA
[2]
A0U7F2C037DA
[2]
A0U7F2C038DA
Field Service Ver. 2.0 Jan. 2010
2. Remove the screw [1], and remove
the cover [2].
3. Illuminate the inside from the open-
ing [1] shown in the illustration.
4. Remove the flapper solenoid [2].
5. Make sure that the flapper [1] and
the damper [2] are in contact with
each other and then tighten two
screws [3].