Paddle Solenoid (Sd2) - Konica Minolta bizhub C360 Service Manual

3. OTHER MAINTENANCE ITEM
3.3.16

Paddle solenoid (SD2)

1. Remove the rear cover.
See P.8
2. Remove the upper cover.
See P.7
3. Remove the FS control board.
See P.15
4. Remove the conveyance roller unit.
See P.10
5. Remove the harness guide.
See P.28
[2]
[3]
9. Reinstall the above parts following the removal steps in reverse.
24
[1]
A0U7F2C033DA
[2]
[4] [1]
A0U7F2C032DA
Field Service Ver. 2.0 Jan. 2010
6. Remove three screws [1], and
remove the rear rail [2].
7. Remove the harness from three wire
saddles [1].
8. Remove the spring [2] and the screw
[3], and remove the paddle solenoid
[4].