Introduction To The Netvanta 4305; Features And Specifications - ADTRAN NetVanta 4305 Hardware Installation Manual

1.

INTRODUCTION TO THE NETVANTA 4305

The NetVanta 4305 is a mid-range IP router designed for medium-to-large office connectivity over Frame
Relay or point-to-point (PPP) networks. This modular platform offers a complete solution for access
routing and WAN connectivity in a single, compact package.
The main base unit supports a variety of interchangeable network interface modules (NIMs) and dial
backup interface modules (DIMs).
The NetVanta 4305 base unit includes the following:
• 1U high housing, rack-mountable, metal enclosure
• Three modular (card) slots (two small, one wide)
• Two built-in Ethernet ports
The NIMs available in this series provide a variety of WAN connectivity options including the following:
• 56K/64K (DDS)
• T1/FT1
• T1/FT1 with DSX-1
• E1/FE1
• Dual T1
• E1/FE1 with G.703 Drop
• Serial (V.35/X.21)
If needed, an analog modem, ISDN BRI (U Interface) DIM, or ISDN S/T DIM can plug onto the NIM,
providing dial backup capability. Refer to Installing Dial Backup and Network Interface Modules on
page 41 for more details.
For VPN applications using the NetVanta 4305, the optional VPN Accelerator Card provides encryption /
decryption and security acceleration services. Refer to Installing the NetVanta VPN Accelerator Card
(1202368L1) on page 43.

Features and Specifications

The NetVanta 4305 has the following features:
• Modular network interface: 56K/64K, T1/FT1, T1/FT1+DSX-1, E1/FE1, Dual T1,
E1/FE1+G.703 Drop, or Serial interface
• 1U high metal chassis with three slots for option modules
• Two integrated 10/100BaseT Ethernet ports (RJ-48C)
• WAN Protocol: Frame Relay or PPP
• Integrated IP router with bridging
• RIP Versions 1 and 2, and OSPF routing protocols
• IP encapsulation over Frame Relay (RFC 1490)
• ADTRAN Operating System Command Line Interface (CLI)
• SNMP management
61200890L1-34B © 2004 ADTRAN, Inc. 19