Table of Contents
Advertisement
This enables the user to upgrade the IRD. Click the Browse button to locate the
application file and then click the Upload button to begin the software upgrade
process. The IRD must be rebooted once the upload is complete in order to run the
new software; this can be done using the Reboot button on the Device Info tab
page.
Note: There are two sections named: Application 0 File which represents
3.9.7
Help
This page gives access to a Web Interface User Guide which provides a brief
description of the interface functionality. To view this page, select the Help tab from
the top of the current web page.
Figure 3.41 Help Web Page
Select the appropriate heading listed on the web page for help with the associated
functions and features.
3.10
Inputs
This page enables the user to view and edit the various inputs to the IRD. To view
this page, select the Input tab from the top of the current web page.
Any changes which are made to the Input page may be confirmed by selecting the
Apply Changes button. Selecting the Refresh button will ensure that the latest
information is being displayed from the current values of the equipment.
EN/LZT 790 0005 R7A
upgrading flash Bank 0 and Application 1 File which represents upgrading
flash Bank 1. Refer to the SW Version in section 3.9.2.1 in order to
determine the current/active flash bank the IRD booted from.
Using the Equipment
3-59
Advertisement
Table of Contents
