Status Pane; C/N Margin (Db) Pane; Input Pane; Ca Pane/Decode Pane/Output Pane - Ericsson RX8000 Reference Manual

Integrated receivers/decoders
Hide thumbs Also See for RX8000:
Table of Contents

Advertisement

3.4.3.6.1

Status Pane

Displays live status information reported by the unit. It is broken down in to subset
sections that are dependent on licenses and options fitted: overall Input Status; C/N
Margin graphical meter; Service Status; Video Status; Audio Status; CC/Subtitle
Status and CA Status.
3.4.3.6.2

C/N Margin (dB) Pane

The C/N Margin Pane is only shown if a Satellite Card is fitted to the unit. When the
Satellite Card is locked to a satellite signal, the C/N Margin is reported in both
numeric and graphical form. The red and green bar represents the C/N Margin value
on the graphical meter.
Figure 3.11 C/N Margin Status Pane
The C/N Margin (Min Value) is the threshold for the C/N Margin alarm that is
configured in the Advanced View. The red part of the meter represents values below
this threshold. The green part of the meter represents values above this threshold.
The C/N Margin alarm remains cleared unless the measured C/N Margin value
drops below this threshold at which point the C/N Margin alarm will be raised.
3.4.3.6.3

Input Pane

This exposes commonly used input configuration settings for the unit. Only ASI, IP
and satellite settings are exposed here. For other input types such as DVB-T2 or
G.703, it will be necessary to switch over to the Advanced View.
3.4.3.6.4
CA Pane
This exposes commonly used Conditional Access configuration settings for the unit.
Only settings for BISS CA are exposed here. For other CA types such as Director or
DVB-CI, it will be necessary to switch over to the Advanced View.
3.4.3.6.5
Decode Pane
Decode settings such as service selection and audio component selection are
exposed here. For other advanced settings, it will be necessary to switch over to the
Advanced View.
3.4.3.6.6
Output Pane
The Output Pane provides access to common output configuration settings such as
TS Feed and ASI or SDI control settings. For advanced settings such TS filtering
settings, it will be necessary to switch over to the Advanced View.
EN/LZT 790 0005 R7A
Using the Equipment
3-23

Advertisement

Table of Contents
loading

Table of Contents