Table of Contents
Advertisement
3.18.4.6.6
IP Output Status
Figure 3.163 Output Tab > IP Output Status Section
•
•
•
•
3.18.4.6.7
MGP (Multimedia Guarding Protocol) Parameters
Figure 3.164 Output Tab > MGP Parameters Section
•
•
•
•
•
EN/LZT 790 0005 R7A
TS Tx Status – Displays the status of the output Transport Stream transmission.
Redundancy Status – Displays the current redundancy status of the IP Card.
RIP Active Path – The current routed path of the IP routing.
Swap RIP Metrics – Checking this box enables the Routing Information
Protocol (RIP) function.
MSM IP – The destination IP address of the MSM (Multimedia Status Message)
packets. This is usually a multicast address as MSMs are meant to be sent to all
devices in the same redundancy group.
MSM Dst Port – The destination UDP port of the MSM packets.
MSM Src Port – The source UDP port of the outgoing MSM packets. Also this is
the port on which the device receives MSM packets. This is usually the same as
Dst Port.
MSM TTL field – The Time to Live field of the MSM packets. It has to be high
enough to reach every device in the redundancy network.
TX Interval – Enables input of the Tx Interval for MSM packets in seconds
where the range is between 1 and 200 seconds.
Using the Equipment
3-349
Advertisement
Table of Contents
