Ethernet/Control Connector - Ericsson RX8000 Reference Manual

Item
Nominal output
impedance
Maximum data rate
Analogue Output level
Load impedance
2.3.11

ETHERNET/CONTROL Connector

All units provide two Ethernet remote control interfaces
for Web Browser Control.
Table 2.10 ETHERNET/CONTROL Connectors
Item
Connector type
Connector designation
Pin-outs
(Unused pins not
connected)
EN/LZT 790 0005 R7A
Specification
Pin 5 – Ground
Pin 6 – Digital audio –
Pin 7 – Ground
Pin 8 – Left –
Pin 9 – Right –
50 Ω
3.072 Mbps
+20 dBm nominal clipping level.
Selectable in range 12 to +24 dBm.
≥600 Ω balanced
Specification
RJ-45 (100BaseT)
ETHERNET 1 or CONTROL 1
ETHERNET 2 or CONTROL 2
Pin 1 – Tx Out (+)
Pin 2 – Tx Out (-)
Pin 3 – Rx In (+)
Pin 6 – Rx In (-)
Installing the Equipment
ETHERNET/CONTROL
2-9