Audio Decoder - Status - Ericsson RX8000 Reference Manual

The PID field provides the audio PID selection for the associated audio decoder.
The audio PIDs are automatically assigned to an audio decoder when a service is
selected. Audio PID selection is based on their order within the service PMT. This
field provides an opportunity for the user to override any PID selections.
Each selection choice details the PID value, the audio language and the audio
format. This information is derived from the audio descriptors listed in the service
PMT.
The NO SELECTION option allows the user to clear any PID selection and stop the
associated audio decoder. Depending on the state of the PMT Update Mode
selected from the Decode > Advanced > Selection Control section, this setting
may be automatically overridden by the RX8000 after a PMT update event.
Also provided is the option to select a USER PID that has been defined in the
Decoder > Advanced options along with an associated audio format. This allows the
user to decode any audio stream that has not been declared in the PMT of the
selected decode service. However, the decoder will continue to enforce
synchronization with the Program Clock Reference (PCR) identified in the service
PMT. If synchronization fails, this will disrupt the audio output.
Note: The same PID can be selected across the Advanced Audio Decoders;
3.14.4.2.2 Audio Decoder > Status
The Status field is a read-only field that reports the Audio Decoder status.
•
•
•
•
EN/LZT 790 0005 R7A
however, this is not supported for the Basic Audio Decoders. If the same
PID is selected for both Basic Audio Decoders, one decoder will attempt to
decode and may report status RUNNING, but the second decoder will fail
and report status ERROR.
RUNNING – The Audio Decoder is successfully decoding.
STOPPED – The Audio Decoder is not active.
ERROR – The Audio Decoder is experiencing errors during decode.
UNLICENSED – The Audio Decoder cannot decode the audio format because
the unit does not have the appropriate license or the audio format is not
supported.
Using the Equipment
3-243