Table of Contents
Advertisement
Using the Equipment
To add a new item to this page:
1. Select the Add Item button. The following page is displayed:
Figure 3.23 Trap Destination Table > Add Item Web Page
2. Enter the required values in the appropriate fields or select values from the drop-
3. Select the Add button to add the item to the Trap Destination table.
4. Select the Back button to return to the Device Info > Trap Destination Table
5. Select the Apply Changes button to confirm changes.
Selecting the Refresh button will ensure that the latest information is being
displayed from the current values of the equipment.
3.9.3
Alarms
The Alarms page provides access to the alarm settings for the IRD.
The content of this page is composed mainly of fields with drop-down menus which
allow the setting or masking of various alarms and check boxes which can be used
to activate relay mapping. Two of the alarm fields, namely C/N Margin and Over
Temperature also have associated entry fields which allow the user to enter a
threshold value which, if exceeded, will activate the alarm.
Setting an alarm property to Set Alarm will cause the following if an alarm event is
raised:
Setting an alarm property to No Alarm masks an alarm event and therefore any of
the behaviors described above. An alarm property can be mapped to the Summary
Alarm Relay if the associated Relay Mapping check box is checked.
3-40
down menus.
web page. This will abort any unsaved changes.
•
Activation of the front panel Alarm LED
•
Raise of an alarm event in the main Status page and record it in the Alarm
Log.
•
If configured for relay mapping, the Summary Alarm Relay will be triggered.
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
