Table of Contents
Advertisement
Using the Equipment
•
Note: 3G-SDI and HD-SDI are exclusive modes. Thus if one BNC is configured as
Press the (Back) key to return to the Output Selection menu.
3.13.4.8.4
Output Three
This menu enables the viewing and editing of output mode for HD/SD-SDI/ASI BNC
output connector 3 (dependent on model and option licenses obtained). To access
this menu from the above menu, press the (Down) key.
Use the (Back) and (Forward) keys to toggle between OUTPUT ONE and
OUTPUT TWO. Use the (Up) and (Down) keys to toggle between the available
options.
This menu allows different configurations to be set:
•
•
•
•
•
Note: 3G-SDI and HD-SDI are exclusive modes. Thus if one BNC is configured
Press the (Back) key to return to the Output Selection menu.
3-220
ASI – The output BNC connector will output Transport Stream.
3G-SDI (or AUTO when the video content is 1080P50/60), the only
permitted options for the other BNC(s) are AUTO, SD-SDI, 3G-SDI or ASI.
OUTPUT
5.1.2
Auto – If the incoming video is 3G, the output BNC connector will be configured
as 3G-SDI. If the incoming video is HD, the output BNC connector will be
configured as HD-SDI. If the incoming video is SD, the output BNC connector
will be configured as (SD) SDI.
HD-SDI – If the incoming video is HD the output BNC connector will be
configured as HD-SDI. If the incoming video is SD the output on the video out
BNC connector is invalid.
SD-SDI – If the incoming video is HD the IRD will down-convert the native HD
video to SD and output on the video output BNC connector as (SD) SDI.
3G-SDI – Allows 1080P50/60 video content to be output on the Output BNC
connector as 3G-SDI. If the incoming video is SD or HD, the output on the video
out BNC connector is invalid.
ASI – The output BNC connector will output Transport Stream.
as 3G-SDI (or AUTO when the video content is 1080P50/60), the only
permitted options for the other BNC(s) are AUTO, SD-SDI, 3G-SDI or ASI.
|OUTPUT THREE : SD-SDI
|
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
