Rx8252 Program Transcoder; Rx8300 Distribution Receivers - Ericsson RX8000 Reference Manual

Integrated receivers/decoders
Hide thumbs Also See for RX8000:
Table of Contents

Advertisement

The advanced modular design of the RX8200 enables
many configuration possibilities allowing it to cover a broad
range of applications. It can be tailored to your precise
needs, resulting in a unit with only those features that are
necessary without the additional expense of superfluous
functionality or connectivity.
The RX8200 can be tailored to standard definition or high
definition uses with MPEG-2 or MPEG-4 decode
technology in both 4:2:0 and 4:2:2 modes as well as JPEG-
2000. Connectivity into the receiver is achieved with DVB-
S2 satellite, new DVB-S2 Extensions (DVB-S2X), IP and
ASI options.
The high powered processing capabilities of the RX8200 enable the unit to be
simply and easily upgraded in the field with additional software options to increment
the functionality at any point after initial installation.
1.2.3

RX8252 Program Transcoder

The RX8252 Program Transcoder variant of the RX8200 offers high density
MPEG-4 AVC to MPEG-2 transcoding in conjunction with superior video quality
allowing you to distribute using MPEG-4 AVC compression while maintaining
compatibility with down-stream legacy MPEG-2 equipment.
The RX8252 can be configured to enable up to six transcodes of any combination of
HD to HD, HD to SD or SD to SD transcoding - allowing the programmer to address
all tiers of service providers. In addition to video processing, the RX8252 also
provides an unsurpassed level of flexibility in its network interfacing through a choice
of service filtering and PID remapping capabilities.
Program content delivered over satellite is securely protected through the RX8252's
support for a wide variety of open-standards conditional access systems. This
functionality can be further enhanced by employing Director by Ericsson - a
sophisticated CA and receiver population control and management system.
1.2.4

RX8300 Distribution Receivers

The RX8300 Distribution Receivers provide off the shelf model functionality
designed to provide a cost conscious unit to fit specific market areas / use case. For
example the RX8320 is specifically designed for 8VSB distribution applications and
offers a set of targeted features specifically for this market.
These basic market focused products can be customized to add extra functionality
as required by the broadcaster, however they do not allow the same level of
customization that is offered by the RX8200 flexible platform.
EN/LZT 790 0005 R7A
Introduction
1-13

Advertisement

Table of Contents
loading

Table of Contents