Table of Contents
Advertisement
Using the Equipment
This feature is only available with the Advanced Audio Decoder devices and
therefore only the RX8200.
•
•
3.14.5.1.1.4
Delay Adjustment
This menu enables the viewing and editing of Delay Adjustment (in ms) settings for
the associated audio decoder.
After selecting the Edit key, use the (Up) and (Down) keys to enter the Delay
Adjustment value (in ms).
This field specifies the Delay Adjustment value for a specific audio decoder. The
field accepts delay values between -49.5 ms and +49.5 ms. The audio Delay
Adjustment value is used to offset the System Time Clock (STC) inside the decoder,
where the STC is referenced to the Program Counter Reference (PCR). The STC is
the master clock used to synchronize the Presentation Time Stamp (PTS) of the
incoming audio stream being decoded.
3.14.5.1.2
Audio 2 Onwards
The Audio 2 and onward menus are identical to the Audio 1 menus, described
above. Unless the RX8200/SWO/4AUD option is fitted and enabled, only Audio 1
and 2 will be available.
To return to the Audio main menu, press the (Back) button.
3.14.5.1.3
Suppress Phase Aligned Audio
This menu enables the viewing and editing of the Suppress Phase Aligned Audio
(PAA) mode.
After selecting the Edit key, use the (Up) and (Down) keys to toggle between
DISABLE and ENABLE.
3-256
DECODE – The audio decoder will attempt to decode the audio stream if
decode is supported for the audio format type in use. The audio stream may be
down-mixed or modified.
PASS THRU – The audio decoder will attempt to pass-thru the audio stream if
pass-thru is supported for the audio format type in use. The audio stream will
pass-thru without any alteration and will typically be decoded by an external
piece of equipment. If pass-thru is not supported for the audio format in use then
the audio decoder will attempt to decode the audio stream by default.
AUDIO 1
4.7.1.4
AUDIO
4.7.11
|DELAY ADJUSTMENT: 000.0 MS
|
|SUPPRESS PHASE ALIGNED AUDIO
|DISABLE
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
