Status Led; Lcd; Arrow Pushbuttons (Up, Down, Left, Right); Usb Connector - Ericsson RX8000 Reference Manual

Using the Equipment
Figure 3.1 Front Panel Controls (RX8200)
3.3.1

USB Connector

This connector is for factory/service use only (not available on the RX8305).
3.3.2

Status LED

This multi-colored LED provides a visual indication of the summary status of the
unit. The LED can be any one of three colors:
•
•
•
3.3.3

LCD

A 2-line x 40-character, back-lit, dot-matrix, Liquid Crystal Display (LCD) provides
menus and settings that vary depending on which IRD model is being used and
which options have been enabled through the purchase of a suitable license.
All menus are numbered to aid navigation.
3.3.4

Arrow Pushbuttons (Up, Down, Left, Right)

Four arrow pushbuttons (or keys) are used to navigate through the front panel
menus. A pushbutton will be illuminated to indicate that a further choice or action is
available by pressing that pushbutton.
3-10
Status LED CA Slot
USB Connector
(Servicing Only)
Red (CRITICAL Error) – Indicates that the unit has lost lock with the Transport
Stream.
Amber (MAJOR or MINOR Error) – Indicates that the unit is locked to a
Transport Stream but an error has been detected signifying incorrect conditions
or system functioning.
Green (NO Errors) – Indicates that the unit is locked to a Transport Stream and
correct conditions and system functioning are detected.
EDIT
LCD
SAVE
LEFT UP
DOWN RIGHT
EN/LZT 790 0005 R7A