Table of Contents
Advertisement
Using the Equipment
3.10.4.7.13
LNB 22 kHz
This check box enables the LNB 22 kHz signal to be activated. Enabling the 22 kHz
tone will command the LNB to switch to its high band local oscillator frequency.
To access this menu from the above menu, press the (Down) key.
Use the (Up) (Down) keys to select ENABLE or DISABLE.
This is the end of the Source 1 sub-menus. To return to the Source 1 main menu
press the (Back) key.
3.10.4.7.14
Source 2/3/4 Configure
The options for Source 2, 3 and 4 menus are as described for Source 1, see above.
To return to the Input menu press the (Back) key twice.
3.10.4.8
Status
RX8000 IRDs can present useful signal quality measurements to the user via the
web browser and through the front panel display
Figure 3.45 Input > SAT Input Web Page
3-74
SOURCE 1
3.2.2.12
|LNB 22KHz
|ENABLE
(UNLOCKED)
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
