Sdi Embedding; Ch 1+2 Embedding; Ch 3+4, 5+6, 7+8, 9+10, 11+12, 13+14 And 15+16 Embedding - Ericsson RX8000 Reference Manual

•
•
The section 3.15.5 Channel Configuration: Phase Aligned Audio (PAA) describes
the behavior in more detail.
3.14.5.2

SDI Embedding

This menu provides sub-menus for viewing and editing of SDI embedded audio
settings. To access this menu from the Audio menu, press the  (Forward) key.
3.14.5.2.1

CH 1+2 Embedding

This menu enables viewing and editing of Channel 1 and 2 for audio embedding.
After selecting the Edit key, use the  (Up)  (Down) keys to toggle between the
available audio decoders. The options presented will depend on what audio
decoders are available and the Channel Configuration mode selected.
3.14.5.2.2

CH 3+4, 5+6, 7+8, 9+10, 11+12, 13+14 and 15+16 Embedding

The embedding menus for the remaining channels are identical to those of CH 1+2,
described above.
EN/LZT 790 0005 R7A
DISABLE – PAA mode will not be suppressed if a PAA service is selected. The
audio component selections for each audio decoder will be selected as per their
unique PAA language descriptor. Component selections cannot be overridden
by the user.
ENABLED – PAA mode will be suppressed if a PAA service is selected. The
audio component selections for each audio decoder will be as per the PMT
order. Component selections assigned to each audio decoder can be overridden
by the user.
AUDIO
4.8
CH 1+2
4.8.1
CH x+x
4.8.x
|SDI EMBEDDING
|
|NO EMBEDDING
|---
|NO EMBEDDING
|---
Using the Equipment
>
3-257