Using the Equipment
Table 3.5
Summary Alarm Pin
Relay 1
3.9.3.3
Control Interface Alarms
Figure 3.25 Alarm settings for Control Interface section
•
•
3.9.3.4
Input Alarms
3-42
Relay Assignment When Configured to Revised Mode
4
8
9
No CSMs Received – Select the alarm condition from the drop-down menu to
be activated when no CSM packets are received (Set Alarm /No Alarm).
No CSMs Received (relay mapping) – Place a check mark in the box to
activate relay mapping when no CSM packets are received.
Assignment
Common
Normally closed
Normally open
Alarm Behavior
-
Closed on Alarm
Open on Alarm
EN/LZT 790 0005 R7A