Multi Service Drop Mode - Ericsson RX8000 Reference Manual

Using the Equipment
Figure 3.95 Multi Service Drop Mode
•
•
•
3-190
Start
Review Current Service
Selection
Service List updated
Yes
Is MSD Hunt Mode
Enabled?
1
No
Is MSD Dop Enabled
2
Yes
Is the currently
selected service in
the present list?
6
No
Select NULL service
No
7
No
Select next service in
list == end of list
Yes
Review complete
No more action taken
Decrypt Service Slaved to Decode – When this option is enabled, selecting a
new service for decode will automatically be selected for decryption too.
Single Filter Service Slaved to Decode – When this option is enabled and a
new service is selected for decode, services currently being filtered will be
cleared and just the decoded service will be added to the Service Filter. This is
regardless of the SINGLE or MULTI filter selection. Additional services for the
Service Filter can be configured afterwards if necessary. The alarm "MSF
invalid operation" will be raised in the case where MULTI-SERVICE filter mode
is modified via SNMP control and the Single Filter Service Slaved to Decode
option is enabled. The alarm will be cleared when the IRD is rebooted or the
follow option is disabled.
PMT Update Mode – This item reviews PID selection after a PMT update for the
currently selected decode service. See Figure 3.96.
Yes
EN/LZT 790 0005 R7A