Table of Contents
Advertisement
3.14.4.2.6
Audio Decoder > Output Channels
The Output Channels field is a read-only field that reports the number of output
channels generated by the Audio Decoder from the audio stream. For example,
where the audio stream is stereo then the number of output channels will be 2.
Where the audio stream is 5.1 then the number of output channels will be 6, unless
it being down-mixed in which case the number of output channels will be 2.
3.14.4.2.7
Audio Decoder > Bit rate
The Bit rate field is a read-only field that reports the Bit rate in kilobits per second at
which the audio stream was encoded.
3.14.4.2.8
Audio Decoder > Sampling Frequency
The Sampling Frequency field is a read-only field that reports the sampling
frequency in Hertz at which the audio stream was encoded.
3.14.4.2.9
Audio Decoder > Buffer Usage
The Buffer Usage field is a read-only field that reports the buffer level used by the
Audio Decoder as a percentage.
3.14.4.2.10
Audio Decoder > Uptime
The Uptime field is a read-only field that reports the Audio Decoder uptime
(expressed in Days : Hours : Minutes : Seconds) at which the Audio Decoder has
been successfully decoding, or has remained in the RUNNING state. If the Audio
Decoder changes to a different state such as ERROR then the uptime will remain
reset to zero. The uptime will start counting from zero once the Audio Decoder state
is set to RUNNING.
3.14.4.3
Decode > Advanced > Audio Decoders
3.14.4.3.1
Suppress Phase Aligned Audio Mode
EN/LZT 790 0005 R7A
Using the Equipment
3-245
Advertisement
Table of Contents
