Radio Mode Disabled - Ericsson RX8000 Reference Manual

Using the Equipment
By default the Radio Mode is disabled and the RX8000 will present a single service
selection for decoding a video or radio service. Video can be decoded and all the
service component elementary streams are synchronized to a single clock reference
i.e. PCR.
When Radio Mode is enabled, the ability to decode a single video service is
removed, and instead a number of radio service selections are exposed. Rather
than just having a PID selection for each audio decoder, it will also have a radio
Service ID selection. The number of audio decoders available is dependent on the
Channel Configuration mode selected.
The service component streams for all these radio services are still synchronized to
a single clock reference. If the Radio service does not share the same PCR, there
may be errors and disruptions with that audio output.
Figure 3.125 Radio Mode – Selecting Audio 1 and 2 Services
3.16.1.6

Radio Mode Disabled

Figure 3.126 Radio Mode Disabled
When the Radio Mode is disabled, most of the video related features are exposed.
3-280 EN/LZT 790 0005 R7A