Table of Contents
Advertisement
•
3.10.7.11.31
PLP FEC Frame Length
This menu shows the current PLP frame length within the T2 transmission.
This can have the values:
•
•
3.10.7.11.32
DVB-T/T2 Scanning system
This menu allows the user to configure the scanning system used by the tuner.
Use the (Up) (Down) keys to select the required value from the available
options.
•
•
3.10.7.11.33
DVB-T/T2 Channel
This menu allows the user to select the channel to be tuned to by the tuner.
Use the (Up) (Down) keys to select the required value from the available
options. Channels are described in more detail above.
3.10.7.11.34
Tuning Frequency
This menu allows the user to input a tuning frequency into the DVB-T /T2 tuner.
Use the (Up) (Down) keys to select the required value from the available
options. A value between 174000 and 23000 (kHz) should be used.
EN/LZT 790 0005 R7A
NON DVB T2
STATUS
3.2.1.2.8
SHORT
NORMAL
SETUP
3.2.2
B/G
D/K
STATUS
3.2.1.1
STATUS
3.2.1.1
|PL FEC FRAME LENGTH
|NORMAL
|SCANNING
|B/G
|CHANNEL
|UHF G21
|FREQUENCY
|230000
Using the Equipment
3-131
Advertisement
Table of Contents
