Phase Aligned Audio - Ericsson RX8000 Reference Manual

Figure 3.119 Audio Decoders > Audio 1 Windows
Under the Decode > Audio Output Routing section, the user is presented with the
following options for both the analogue outputs and the SDI embedded outputs:
•
•
•
•
•
•
Note that in PAA mode, Groups 1 and 2 under the Decode > Audio Output
Routing > SDI Embedding section will be changed to read-only fields that cannot
be modified by the user (Groups 3 and 4 will also be changed in the case of Dual
PAA). These will be forced to default routing values.
3.15.5.5.1

Phase Aligned Audio

For a single PAA instance, up to 8 channels are supported by the RX8000. Six
audio decoders are exposed to the user with Audio Decoders 1-4 reserved for PAA.
It should be noted that with the RX8200, where 6 Channel PAA is being decoded,
Audio Decoder 4 will become available to the user for configuration. This was
originally unavailable on the RX1290.
Table 3.36 Available Output Channels on RX82xx for PAA
RX82xx Disable 4AUD
license
Audio 1
Decoder
Physical Advanced
decoder
Output N/A
Channels
Channel N/A
Name
EN/LZT 790 0005 R7A
Audio 1, STEREO.
Audio 2, STEREO.
Audio 3, STEREO.
Audio 4, STEREO.
Audio 5, STEREO.
Audio 6, STEREO.
Enable 4AUD license
2 1
Advanced Advanced
N/A 6 channels across 3 decoders
N/A PAA
2 3
Advanced Advanced
Using the Equipment
4 5
Advanced Basic
2 2
L R L R
(Stereo) (Stereo)
6
Basic
2
L R
(Stereo)
3-267