Introduction
1.5
Rear Panels
All inputs, outputs and control connections are taken via the rear panel. Due to the
modular nature of these units, factory fitted hardware modules with different
connections can be fitted to any unit and therefore only a typical (sample) rear panel
images are shown below.
Full details of the connectors for ALL base models and options are given in
Chapter 2, Installing the Equipment.
Figure 1.8 Rear Panels (RX8200, RX8252, RX8310, RX8315, RX8320 and RX8330)
1-18
EN/LZT 790 0005 R7A