Serial Number Identification; Chassis Ident Sn; Board Serial Number/Customization Serial Number; Unique Hardware Id - Ericsson RX8000 Reference Manual

Introduction
1.6

Serial Number Identification

Beginning in 2014, Ericsson began a process of transitioning from numeric serial
numbers to an alphanumeric scheme. As part of this process, all receivers will
display the serial number using the new format.
For further details on the serial number scheme used, contact Ericsson Customer
Services.
1.6.1

Chassis Ident SN

The Chassis Ident SN can be found printed on the left side panel of the RX8000
unit towards the rear panel. It can also be found in the web browser interface under
the Device Info Tab in the Device Info > Unit Chassis Ident section.
This uniquely identifies the RX8000 unit and is the serial number that should be
used in all cases when communicating with Ericsson Customer Services so that it
can be tracked. All components fitted to your RX8000 unit will be tied to the Chassis
Ident SN.
Refer to Chapter 3 on how to use the web browser interface.
1.6.2 Board Serial Number
The Board Serial Number can be found in the web browser interface under the
Device Info Tab in the Device Info > Modules section. The Board Serial Number
will be listed in the RX8000 row (Board Type 1900) under the Serial Number
column.
Refer to Chapter 3 on how to use the web browser interface.
1.6.3 Customization Serial Number
The Customization Serial Number can be found in the web browser interface
under the Customization Tab in the Customization > Parameters > Serial Number
section. This number should be used when Custom Keys or License Keys need to
be activated.
Refer to Chapter 3 on how to use the web browser interface.
1.6.4

Unique Hardware ID

The Unique Hardware ID is a unique identifier used for addressing the receiver in
an Ericsson Director system. It is the same as the Customization Serial Number
described above.
1-20 EN/LZT 790 0005 R7A