Table of Contents
Advertisement
3.17.1.6.1
VBI
Figure 3.129 Decode > VBI-VANC > VBI
•
•
3.17.1.6.2
VANC
Figure 3.130 Decode > VBI-VANC > VANC
•
•
•
•
•
EN/LZT 790 0005 R7A
VBI PID – Enables selection of the Vertical Blanking Interval Packet Identifier
from the service list via a drop-down menu. The first VBI PID in the PMT of the
selected service is selected automatically.
User PID – Enables user to specify the VBI User PID that can be selected the
VBI PID list.
VANC PID – Enables selection of Vertical Ancillary Data Packet Identifier from
the service list via a drop-down menu. The first VANC PID in the PMT of the
selected service is selected automatically.
User PID – Enables user to specify the VANC User PID that can be selected the
VANC PID list.
Stream Status – Displays the presence of Vertical Ancillary Data from the
incoming stream.
Output Status – Displays the presence of Vertical Ancillary Data in the output
stream.
Enable VANC – This menu allows the user to enable or disable data to be
extracted from the VANC PID.
Enable SD-VANC – This menu allows the user to enable or disable the insertion
of data in to the SD-SDI VANC space.
Using the Equipment
3-285
Advertisement
Table of Contents
