Table of Contents
Advertisement
•
3.14.4.7.1
Split Audio Decoder and Create Audio L and Audio R Decoders
This function specifies if an Audio Decoder will output a stereo pair or is split to form
a dedicated left Audio decoder and a dedicated right Audio Decoder. The section
Channel Configuration: Paired Decoder Mode describes the behavior in more detail.
3.14.5
Front Panel Audio Selection and Control
Selection and control of audio options are limited on the front panel. It is possible to
change the audio PID selection for each Audio Decoder and which group the audio
is embedded when inserted in to the SDI output.
An overview of where the audio menus are accessed through the front panel is
shown below. It should be noted that the menu number shown in the bottom left
corner of the display may be different to number shown in the diagram below. Menu
items may be added or removed depending on RX8000 variant and license features
enabled.
SERVICE
4
Figure 3.117 Accessing Audio Menus through the Front Panel
EN/LZT 790 0005 R7A
RX8200/SWO/AUD/PAIRED
| SERVICE
|
SERVICE
4.7
SERVICE
4.8
| AUDIO
|
AUDIO
| AUDIO 1
4.7.1
|
AUDIO
| AUDIO x
4.7.x
|
AUDIO
| SUPPRESS PHASE ALIGNED AUDIO MODE
4.7.11
| DISABLE
| SDI EMBEDDING
|
CH 1+2
| AUDIO 1, STEREO
4.8.1
| RUNNING
CH x+x
| NO EMBEDDING
4.8.x
| ---
Using the Equipment
AUDIO 1
| COMPONENT SELECTION:
4.7.1.1
| 256 – DUT AC-3
AUDIO 1
| USER PID: 0000
4.7.1.2
| USER STD: MUS
AUDIO 1
| MODE: DECODE
4.7.1.3
|
AUDIO 1
| DELAY ADJUSTMENT: 000.0 MS
4.7.1.4
|
3-253
Advertisement
Table of Contents
