Failover Mode Switch; Stream 1/Unicast Enable 1; Mcast Ip Address 1/Source Ip Address 1; Udp Port 1 - Ericsson RX8000 Reference Manual

3.10.5.13.41

Failover Mode Switch

This menu enables the viewing and editing of the Failover Mode Switch. To access
this menu from the above menu, press the  (Down) key.
Use the  (Up) and  (Down) keys to toggle between the Interfaces and Streams
and Interfaces Only.
3.10.5.13.42

Stream 1/Unicast Enable 1

This menu allows the enabling of Unicast and provides sub-menus to further control
parameters. To access this menu from the above menu, press the  (Down) key.
Use the  (Up) and  (Down) keys to toggle between the True and False options.
3.10.5.13.43 MCAST IP Address 1
This menu enables the viewing and editing of the Multicast IP address. To view and
edit the MCAST IP Address 1, press the  (Forward) key.
Use the  (Up),  (Down),  (Forward) and  (Back) keys to enter the address.
3.10.5.13.44 Source IP Address 1
This menu enables the viewing and editing of source IP address. To access this
menu from the above menu, press the  (Down) key.
Use the  (Up),  (Down),  (Forward) and  (Back) keys to enter the address.
3.10.5.13.45

UDP Port 1

This menu enables the viewing and editing of UDP Port 1. To access this menu from
the above menu, press the  (Down) key.
EN/LZT 790 0005 R7A
I/P PORT
3.2.5.3
STREAM 1
3.2.6
STREAM 1
3.2.6.1
STREAM 1
3.2.6.2
|FAILOVER MODE SWITCH
|INTERFACES ONLY
|UNICAST ENABLE 1
|TRUE
|MCAST IP ADDRESS 1
|000.000.000.000
|SOURCE IP ADDRESS 1
|000.000.000.000
Using the Equipment
>
3-97