Table of Contents
Advertisement
Using the Equipment
•
•
•
•
The Dashboard View mode is available to most RX8000 variants with the
RX8000/DASHBOARD license which is enabled by default. The license can be
disabled to permanently remove the Dashboard View by contacting Ericsson
Customer Services.
The following table lists the various icons, buttons and other symbols used in this
web interface mode.
Table 3.1
Item
Navigation
Parameter Presentation
3.4.3.6
Simplified Settings
The status and configuration settings exposed in the various panes should reflect
the values and some options available from the Advanced View. For more details
about each status or configuration setting, please refer to sections later in this
manual.
3-22
Advanced View Button – When in the Dashboard View mode, this button will
switch the web interface to the Advanced View.
Overall Status Pane – Contains a subset of sections to the left of the page that
summarize the operating status of the unit. These status values are updated
dynamically by the Dashboard View.
Configuration Panes – A simplified view of the most popular configuration
settings to the right of the page that can be applied to the unit.
C/N Margin Graphical Meter – If fitted with a satellite input card, the current
C/N Margin for the locked satellite signal is reported and visually represented by
a graphical meter.
Web Page Icons, Buttons and Symbols in the Dashboard View
Description
Click on this button to view the currently active alarms raised by the
unit.
Click on this button to push configuration changes to unit that will be
applied immediately.
Click on this button to discard all configuration changes that have
not yet been applied. Changes will revert to the active settings.
Switch from the Dashboard View mode to the Advanced View
mode.
The icon to the right of each pane is used to collapse or expand an
individual pane and its contents:
Pane is expanded, click to collapse.
Pane is collapsed, click to expand.
EN/LZT 790 0005 R7A
Advertisement
Table of Contents
